Forum Replies Created
-
You’re going to need someone that is experienced with programming controllers to help out in person. This is not something that I or any tech can troubleshoot online in a forum. You’ll need to provide a lot more information, there are way too many variables at play in order for me (or anyone) to give you effective advice.
in reply to: Programming HelpFinding a used one is going to be like finding a needle in a haystack. You could try checking out a used one for scrap parts on the used market. Have you been to http://www.buysellwheelchairs.com?
——-
Module error (other than Remote) Check LiNX connections and wiring.
Replace the Power Module.Here is the link to the user manual:
https://www.mobilityscootersdirect.com/pdf/Compass-Sport-Power-Wheelchair.pdf
Hello PopopMDS,
Sorry to hear about your troubles, I was able to find a manual for the Rascal 600 F. Check out the link below and let me know if that helps:
https://www.manualslib.com/products/Rascal-Rascal-600f-3160645.html
In order for the unit to work properly, you need to ensure that both of the brakes are in the drive position. Simply make sure you cannot push the unit and that will ensure that they are both in the drive position. If the unit has any of the motors in the “free-wheel” position, then it will not work and you will hear 5 beeps.
Again, both of the levers need to be in the same position which is the “drive” or “locked” position.
Is this what you’re looking for? http://www.invacare.com/doc_files/1091860.pdf
in reply to: invacare panther LX4 scooter wont go.it’s over 20 years old, that motor is dead and other components have likely failed too. Have you checked out our cheap mobility scooters page:
https://www.mobilityscootersdirect.com/mobility-scooters/clearance-cheap-mobility-scooters.html
We offer coupon discounts and financing options.
in reply to: 1999 pride celebrity xl loss of powerCan you take a picture and upload it here so we can see it?
in reply to: Pacesaver passport not workingYou’re going to need something customized more than likely. I would contact someone who has a 3-d printer and some strong material to print with. Perhaps they can make something custom for you. Try going to craigslist and searching for a 3d printing service provider near you.
in reply to: Looking to stop Permobil foot rests from flipping upOK, so it IS possible. However – you need the controller to be re-programmed and this requires special equipment and an experienced technician. It should not take long to do, but you definitely need to hire help from someone with the programming tools.
I’m not sure this is possible. I will ask the manufacturer for you and update you if there is a way to do it.
You might need someone to reprogram the controller. I would call a local tech.
in reply to: Repair help neededin reply to: 7 beep code please helpYou have likely damaged the unit by using AGM/GEL batteries. These units are designed to only work with dry cell sealed lead-acid batteries.
in reply to: Battery IssuesThe joystick controller needs to be re-programmed. You’ll need to find a local tech for this.
in reply to: Pride Jazzy chair runs backwardsI’m not sure what a Carco scoot case switch is, I’ve never heard of it.
in reply to: wiring diagram